A–Z Corrugated Packaging Glossary
Precise engineering definitions, standardized testing methods, and operational variables used across corrugated box plants and paper mills.
Terms Starting with "B"
B-flute
fluteB-flute has a caliper of approximately 3.2 mm (47 flutes per foot), offering high crush resistance and a flatter surface ideal for sharp flexographic printing and die-cut mailer cartons.
BC flute (double wall)
fluteBC flute is a double-wall combination combining B-flute and C-flute layers to produce a rigid 7.2 mm board engineered for heavy industrial export shipping and maximum pallet stacking resistance.
Basis weight
paperBasis weight is the imperial measurement of paper density expressed in pounds per 1,000 square feet (lbs/MSF), corresponding to 1 lb/MSF = 4.882 GSM.
Board grade
paperBoard grade defines the structural specification of corrugated board by its component plies, e.g. 150K/120M/150T indicates 150 GSM Kraft outer, 120 GSM Medium, and 150 GSM Test liner inner.
BCT (Box Compression Test)
compressionBCT (Box Compression Test) measures the maximum top-to-bottom compressive load (in kgf, N, or lbf) that a fully finished, empty corrugated box can support before structural sidewall collapse occurs.
Burst strength (Mullen)
compressionBurst strength, or the Mullen test (TAPPI T 810), measures the hydrostatic pressure in kilopascals (kPa) or psi required to rupture a circular corrugated board specimen, assessing puncture and rough handling resistance.
Terms Starting with "C"
C-flute
fluteC-flute is the most widely produced corrugated profile worldwide at roughly 4.0 mm thickness (39 flutes per foot), striking an optimal industrial balance between stacking compression and printability.
Caliper
genericCaliper is the thickness of a paper sheet or corrugated board measured under standardized pressure in microns (μm), millimeters (mm), or points (thousandths of an inch).
Cobb test
genericThe Cobb test measures the amount of water absorbed by paper or board surface over a specified time (typically Cobb60), indicating the water resistance and sizing effectiveness of linerboard.
Terms Starting with "E"
E-flute
fluteE-flute is a micro-flute measuring 1.6 mm in thickness (90 flutes per foot), engineered to replace solid bleached sulphate cartons with enhanced structural rigidity and superior high-resolution retail print quality.
ECT (Edge Crush Test)
compressionECT (Edge Crush Test) is the standardized laboratory method (TAPPI T 811 / ISO 3037) measuring the edgewise compressive strength of corrugated board in kN/m, serving as the foundational variable in the McKee box compression formula.
Terms Starting with "F"
F-flute
fluteF-flute is an ultra-micro corrugated board at 0.8 mm thickness (128 flutes per foot), delivering rigid lightweight protection for premium retail cosmetic and fast-food packaging with reduced fiber weight.
Flute
fluteA flute is the wave-shaped wave arch formed in corrugating medium paper that provides thickness, rigidity, insulation, and cushioning between flat linerboard sheets.
FCT (flat crush test)
compressionFlat Crush Test (FCT) measures the resistance of corrugated flutes to flatwise crushing forces, directly indicating flute formation quality, leaning flutes, and roll wear on the corrugator.
Terms Starting with "L"
Terms Starting with "M"
Medium (fluting)
fluteMedium is the malleable paper sheet that is conditioned with steam and heat to be shaped into wave-like flutes on the single-facer corrugator rolls.
McKee formula
compressionThe McKee formula is the packaging industry standard predictive empirical equation: BCT = 5.876 × ECT × √(caliper × perimeter), accurately correlating board strength and box geometry with stacking load.
Terms Starting with "P"
Terms Starting with "S"
Semi-chemical fluting
fluteSemi-chemical fluting is corrugated medium produced from hardwood fibers treated partially with chemicals and mechanical refining, providing exceptional flat crush resistance and stiffness under humid conditions.
Single wall
fluteSingle-wall corrugated board (3-ply) consists of one corrugated medium glued between two flat outer linerboard sheets, accounting for over 80% of standard commercial shipping boxes.
Stacking strength
compressionStacking strength is the actual compressive load a corrugated box can withstand over time in a warehouse stack, calculated by dividing BCT by dynamic environmental safety factors (humidity, time, pallet overhang).
Safety factor
genericA safety factor is a multiplier (typically 3.0 to 5.0) applied to stack load requirements to compensate for warehouse humidity, storage duration, transit vibration, and pallet misalignment.
Terms Starting with "T"
Test liner
paperTest liner is recycled paperboard composed largely of recovered paper fibers, often surface-sized with starch, delivering a cost-effective, eco-friendly alternative to virgin kraft for local shipping cartons.
Triple wall
fluteTriple-wall corrugated board (7-ply) incorporates three fluted mediums and four liners, providing ultra-heavy structural strength capable of replacing timber crates for machinery exports.